CHECK OUT
 
Catalog
Terms and conditions
Miscellaneous Payments
Price Match
         

HOME

FAQ'S

UNLOCK CABLES

RESELLERS

CONTACT US

         


Iden Installing Drivers

Please shut down any Antivirus SW on your PC (it must be shut down not disabled, see your AV suppliers documentation on how to do this) while using the Nextgen Server, This is very important !!

Drivers are in the "iden_drivers" folder in the client download zip file

Follow the install wizard instructions.

1. Turn on Iden phone and connect to your PC via USB cable
2. Your PC should flash "message new hardware detected"
3. A new hardware wizard will start.
4. If the wizard asks "can windows connect to windows update to search for software? " choose "No, not this time"
5. Then on the next screen choose "Let windows search for driver"
6. Click "Next" windows will now find the drivers and install the device.

Next please update driver by running the fix.bat which can be found in the iden_drivers\Fix\..  folder.

Iden Cable: USB Nextel Boost Cable (as supplied with phone)

Alternative cable, you can modify a Motorola V66/525 type p2k USB cable to fit Iden/Nextel phones, simply remove the black lug
from in-between the pins

Supported phones:-

850, i450 R9 & R8: i355, i605, i710, i530, i530, i305, i833, i835, i415, i275, i860, i860 Woody,i860 Tattoo, i830, i830 Roxy, i730, i285, i215, i205, i305, i530, i710, i325, i315, i600, i390,i1000, i1000plus, i500plus, i700plus, i2000plus, r750plus, iX1000, i550plus, i2000, i85s, i50sx,i55sr, i80s, i90c, i85s, i80s, i30sx, i35s, i95cl, i60c, i90c, i88s...ect

Rom 9-13 supported

To check Rom Version:-

Press "#" press "*" press "menu" press "right arrow"
Scroll down to Software or unit info.

i850 - Software Tpe: MS-PDGY-BER-DEERKEY_WIDEN-R13

Where the R at the end is the rom version, the above example being ROM 13

Iden Unlocking Instructions:

Note these instructions are not for the i930 : i930 instructions are here

Please remove SIM card before unlocking, and insure good connection between cable and the phone, if you get CHG error, try holding cable into phone during unlock.

7. Enter your User name & password
8. Make sure "main server" is set under Server Settings
9. Select "Iden" under Phone setting
10. Connect phone to PC, phone powered on (sim out)
11. Press "unlock" on software
12. In 2 to 3 seconds phone will be unlocked. Phone will reboot after unlock.

Notes About i415 and 1870, with these 2 they have to enter the code each time they reboot the handset.

 

If you get "Oops ! CHG error !",

1. Check SIM card is removed
2. Change phones baud rate to: 115200 (phone menu/settings/advanced/baud rate)
3. Try several times
4. Upgrade your phones firmware to the latest version. You can download the upgrade utility from here;
http://idenphones.motorola.com/iden/support/software/html/firmware_utility.html

It is very important to follow all of the above in the event of CHG error !!!!!

If you get "Corrupt Data"

1. Perform Master Reset. (remember to change your pass code/security code in the instructions below if you have changed them)

Master Reset for i1000plus, i1000, i2000plus, i700plus,i550plus, i500plus, i370, i390 and i600 phones: Master Reset for i95cl, i90c, i85s, i80s and i30sx phones: Master Reset For i205, i305 i750 phones:
1. Enter * # 43 (Your phone will prompt "Master Reset")
2. Select "OK" once (Your phone will prompt "passcode")
3. Your passcode is "0000" (Your phone will prompt "Master Reset")
4. Enter security code as 000000 and Press "OK"
5. Select "Yes" for Master Reset
6. Select "OK" for caution: see manual
7. The phone will auto power off
8. Switch on the phone again
1. Press Menu
2. Scroll and Select "Settings"
3. Scroll and Select "Security"
4. Scroll and Select "Master Reset"
5. Enter security code as 000000 and Press "OK"
6. Select "Yes" for Master Reset
7. Select "OK" for caution: see manual
8. The phone will auto power off
9. Switch on the phone again

1. Press Menu
2. Scroll and Select "Settings"
3. Scroll and Select "More"
4. Scroll and Select "Advanced"
5. Scroll and Select "Connectivity"
6. Scroll and Select "Master Reset"
7. Enter security code as 000000 and Press "OK"
8. Select "Yes" for Master Reset
9. Select "OK" for caution: see manual
10. The phone will auto power off
11. Switch on the phone again