The Motorola drivers can be found in the "phone p2k drivers" Folder

Please shut down any Antivirus SW on your PC (it must be shut down not disabled, see your AV suppliers documentation on instructions how to do this) while using the Nextgen Server, This is very important !!

1. Turn on V3 and connect to your PC via USB cable
2. Your PC should flash "message new hardware detected"
3. A new hardware wizard will start.
4. If the wizard asks "can windows connect to windows update to search for software? " choose "No, not this time"
5. Then on the next screen choose "Install from a list or specific location"
6. Tick "Include this location in the search" and un-tick "Search removable media"
7. In the address box browse to where-ever you have extracted the "phone p2k drivers" folder
8. Click "Next" windows will now find the drivers and install the device.

You now need to repeat the above process but with the phone in boot-mode (same as flash mode)

1. Have the phone turned off
2. Place V3 in Boot/Flash mode (hold # & * keys and power on the phone)
3. Boot screen will appear on phone (black screen with white writing)
4. Connect to your PC via USB cable
5. Repeat steps 3 to 8 above

You will only need to perform the above once on each PC you use, the first time you connect a phone.

(This is the same as placing phone in boot mode)

• Hold down # & * key and press Power button

• Boot screen is displayed on phone (some versions of phone screen will be black no writing after stage 1)

• Client will detect phone and complete next stage.

Only 1 credit per unlock is required !!

If for some reason, you complete stage 1, and then process needs to be restarted, Select V3 manual, and start there, do not attempt to start from beginning on "V3 Auto" you will have used your credit already!!! (if you have an account with multiple credits, another credit will be deducted, each time you complete stage 1.)

If your phone is stuck in flash mode or phone keypad lights but not enter boot mode.