HTC Universal
iMate JASJAR, T-Mobile MDA Pro, O2 XDA Exec, SPV M5000, Qtek 9000, T-Mobile MDA Pro, QTEK 9000, Wireless PDA V1640, Dopod 900

Please shut down any Antivirus SW on your PC (it must be shut down not disabled, see your AV suppliers documentation on instructions how to do this) while using the Nextgen Server, This is very important !!

Make sure your Smart Phone is fully charged before starting unlock!!! Before you Start: 1. Make sure your have downloaded the latest server client and have an unlock credit 2. Make sure you have Treo HTTC drivers download and extracted to a folder on your PC. Drivers are in the "httc-treo-driver" folder.

Before you go any further make sure Active Sync has been shut down, or the Client will be unable to communicate with the phone.

Also if you use “Microsoft Active Sync” Shut that down as well.

Unlocking the HTC  HERMES / UNIVERSAL

1. Run Client
2. Enter your User name & Password under “username & password” tab
3. Click on “server settings” make sure “main server” is selected
4. in “phone settings” select “heremes 100” from drop down list.
5. Open up the cover over the SD card,
6. Connect USB Sync Cable (as supplied with phone)
7. Place Phone in “Test Mode” using the instruction below..
   • Press and Hold both the POWER and the side OK buttons
   • Using Pen/stylus Press and hold for 1 second Reset button
   • Release reset button, then release POWER & OK buttons
   • Display should be red/blue etc and detail boot loader version
   • Phone is now in Test Mode